🚀 New: wiZard, your AI agent for a more efficient workshop >
Circular Economy Car Parts in France: What Garages Must Offer — Carform

Circular economy car parts (PIEC) in France: what garages must offer their customers

Since 1 January 2017, garages and body shops in France must offer customers circular economy car parts (pièces issues de l’économie circulaire, PIEC) instead of new parts for certain categories. Here is what the rule says, which parts are covered, the exemptions, and how to keep a record of the customer’s choice.

Regulation and compliance Published in November 2026 6 min read
Illustration for the article on circular economy car parts (PIEC) offered by garages and body shops in France

The management software built for automotive aftersales.

What is a circular economy car part?

A circular economy part (PIEC) is a spare part that comes from a state-approved end-of-life vehicle (ELV) centre, or that has been refurbished to the manufacturer’s specifications under the “standard exchange” label. It used to be called a reuse part.

A used part that has simply been repaired, without being refurbished (known as “repair exchange”), does not fall under this definition. The distinction matters: it determines what the garage must offer.

What French law has required of garages since 2017

Since 1 January 2017, every business selling vehicle maintenance or repair services in France must let customers choose circular economy parts instead of new parts for certain categories. The obligation comes from the energy transition law of 17 August 2015 and was specified by the decree of 30 May 2016 (articles L224-67 and R224-22 to R224-25 of the French Consumer Code).

It applies to body shops and to mechanical and servicing workshops alike. Since 1 October 2024, it also extends to the repair of motorised two- and three-wheelers, according to J2R (in French).

Which parts are covered?

The list is set by the decree and reproduced on the official poster of the French Ministry for the Ecological Transition (in French). Five families of parts are covered:

  • removable body parts;
  • interior trim and upholstery parts;
  • non-bonded glazing;
  • lighting parts;
  • mechanical or electronic parts, except running gear, steering, braking and assembled ground-contact components subject to mechanical wear and not dismountable.

For a body shop, the first family is the most common: a wing, bumper or bonnet replaced after a claim falls directly within the obligation.

When the garage does not have to offer them

The garage is exempt from offering a circular economy part in three situations set out in article R224-23 of the Consumer Code:

  • the part is replaced free of charge, under a contractual warranty or as part of a recall;
  • no circular economy part is available within a time compatible with the vehicle’s downtime;
  • the professional considers that the part presents a significant risk to the environment, public health or road safety.

In these cases, the reason preventing the offer must also be given to the customer on a durable medium.

Display, inform and record the customer’s choice

The obligation is not just about offering the part verbally. It rests on two things the garage must be able to show.

A visible notice. A clear poster, readable from outside, at the entrance where customers book, informs them that they can choose circular economy parts. It lists the categories of parts covered and the exemptions.

The customer’s choice, collected before they agree. Before the customer accepts the service offer, the garage asks them to state on a durable medium whether they opt for circular economy parts. This choice is followed by a mandatory statement, which must appear in French. In translation, it reads:

“They are supplied subject to availability, to the professional stating the availability lead time and their price, and provided they do not fall under the exemptions of article R224-23 of the Consumer Code.”

The garage must also inform the customer of the price and terms of sale of the parts offered, and keep a copy of the documents given. In bodywork, where the price is agreed with the insurer’s assessor, presenting a double estimate (new parts and circular economy parts) makes both options clear to everyone.

In practice, the quote or repair order carries this choice. Signed electronically and kept in the vehicle file, it keeps a dated record of what was offered and accepted, rather than a sheet of paper that gets lost. That is what body shop management software or auto repair software makes possible.

What a garage risks if it does not comply

According to France’s National Consumer Institute (in French), breaching this information obligation can lead to an administrative fine of up to €3,000 for an individual and €15,000 for a company. And in a dispute, it is up to the professional to prove that circular economy parts were offered, as Mobilité Club France points out (in French).

The simplest approach is to make it a habit: an up-to-date poster at reception, and a circular economy box completed on every relevant quote or repair order. It is the same principle as e-invoicing: an obligation that is easier to manage when documents are digital from the start.

Keep a record of every customer choice in the vehicle file.

Request a demo
Dedicated onboarding support

FAQ: circular economy car parts

Garages’ and body shops’ questions about PIEC in France

Must a garage in France offer used parts?
Yes, for certain categories of parts. Since 1 January 2017, every vehicle maintenance or repair business must let customers choose circular economy parts instead of new parts. The customer remains free to accept or refuse.
Which spare parts are covered by the obligation?
Removable body parts, interior trim and upholstery parts, non-bonded glazing, lighting parts, and mechanical or electronic parts, except running gear, steering, braking and certain ground-contact components.
When can a garage not offer circular economy parts?
When the part is replaced free of charge, under a contractual warranty or in a recall; when no circular economy part is available within a time compatible with the vehicle’s downtime; or when the professional considers it presents a significant risk to the environment, public health or road safety.
How can a garage prove the customer was given the choice?
By collecting the choice on a durable medium before the customer agrees to the offer, with the mandatory statement required by the regulations, and keeping a copy of the documents given. A quote or repair order signed electronically and kept in the vehicle file provides a dated record.
What is the penalty for non-compliance?
An administrative fine of up to €3,000 for an individual and €15,000 for a company. In a dispute, it is up to the professional to prove the obligation was met.
Does the obligation apply to two-wheelers?
Yes. Since 1 October 2024, the obligation to offer circular economy parts extends to the repair of motorised two- and three-wheelers.
Scroll to Top